Before you invest $20,000–$40,000 in solar panels, make sure your roof can support them for their full 25-year lifespan. Atlas Home Pro performs pre-solar roof assessments and replacements designed to maximize your solar investment and eliminate the costly mistake of re-roofing mid-installation.
GET A FREE ESTIMATE
Los Angeles homeowners are among the most active solar adopters in the country, driven by high utility rates, abundant sunshine, and LADWP and state incentive programs. But solar companies often don’t perform the full roof assessment needed to identify problems that will surface after panels are installed. Atlas Home Pro bridges this gap — we assess your roof’s readiness, perform any necessary repairs or replacement, and coordinate directly with your solar installer.
Before any solar installation, Atlas Home Pro performs a comprehensive roof assessment: remaining shingle life, deck condition, flashing integrity, load capacity, and drainage. We provide a written report that you can share with your solar installer so all parties understand the roof’s current condition and any work required. This assessment is free for any homeowner planning a solar installation.
If your roof needs replacement, doing it before solar installation is the economically smart choice. The cost of removing and reinstalling a solar array mid-roof-life is $3,000–$6,000 or more. Atlas Home Pro installs new roofing with solar in mind: reinforced decking where mount points will go, proper underlayment, and conduit pathways for electrical runs. We work with your solar company’s layout plans to optimize both systems.
Asphalt composition shingles remain the most solar-friendly roofing material due to easy penetration and standard flashing compatibility. For longer-lasting substrates, concrete or clay tile with a 40–50 year life span is excellent, though specialized mounts are required. Metal standing seam roofing is the premium solar-compatible option as panels can attach via non-penetrating clamps, leaving the roof membrane entirely intact. We install all three.
Every solar mount penetration must be properly flashed to maintain the roof’s waterproof integrity. Atlas Home Pro installs manufacturer-approved flashing systems for all common solar mounting hardware (Unirac, IronRidge, Schletter) and guarantees watertight penetrations. We also seal and inspect all existing roof penetrations — vents, pipes, HVAC curbs — before solar installation.
LADWP offers solar incentives that make LA one of the best markets in the country for rooftop solar. However, LADWP requires proper permitting for both the roofing and solar work. Atlas Home Pro handles all LADBS roofing permits and coordinates with your solar installer on the electrical permits, ensuring a smooth, code-compliant project from start to finish.
Written report with photos documenting current roof condition for your solar installer and insurance company.
We work directly with your solar company to sequence work properly and ensure mount points are properly prepared.
LADBS roofing permits, inspections, and documentation provided on every project.
"We’ve saved dozens of homeowners $5,000+ by catching roof issues before solar installation."
— Atlas Home Pro Roofing Team
Tell us what you need. Our team reviews every request and calls you back within the hour to confirm your appointment.
If your roof is within 5 years of its expected end of life, replacing it before solar is strongly recommended. Removing and reinstalling solar panels to replace a roof mid-life typically adds $3,000 to $6,000 to the project cost — more for larger systems. If your roof is newer and in good condition, a thorough inspection can confirm it is ready for the 25-year commitment of a solar installation.
Asphalt shingles are the easiest and most cost-effective substrate for solar installations. Concrete or clay tile roofs require specialized mounts and careful flashing but are very durable. Metal roofing (standing seam) is the premium solar-compatible option as panels can attach via non-penetrating clamps, leaving the roof membrane entirely intact. Flat roofs with TPO or spray foam membranes are excellent for ballasted or adhered solar systems.
Solar panels typically carry 25-year performance warranties. Your roof should have at least 20 years of remaining useful life before a solar installation. If your roof has less than 10 years remaining, replacing it now is almost always more economical than doing it mid-solar-system. Atlas Home Pro provides a free written assessment of remaining roof life.
Solar panels installed by qualified contractors using proper flashing and mounting hardware do not void the roofing warranty when the work is done correctly. Atlas Home Pro coordinates directly with solar installers, installs required flashing and penetration seals to roofing manufacturer standards, and documents all work to preserve warranty coverage. Improper solar installation can void coverage — which is why working with a licensed roofer matters.
A standard asphalt shingle roof replacement runs $12,000 to $22,000 for most LA homes depending on size, pitch, and removal of existing layers. If you add solar-specific preparation (upgraded flashing, reinforced decking at mount points, and conduit pathways), expect to add $500 to $2,000 to the cost — far less than the $3,000 to $6,000 cost of removing and reinstalling panels for a mid-life roof replacement.